I’m having trouble installing my Anti-Rebound bar?
Ensure that Foonf is in recline position 3. The Anti-Rebound Bar can NOT be installed in recline position 1 or 2.
In order to install the Anti-Rebound Bar into the seat frame, you must EITHER:
- Push the Anti-Rebound Bar into the seat frame by FIRMLY tapping on the bottom of the Anti-Rebound Bar. The locking tabs on the Anti-Rebound Bar are wider than the hole in the seat frame and must be depressed to fit; or
- One at a time, squeeze the locking tab located at the end of the Anti-Rebound Bar by putting your finger through the top-facing side of the hole in the seat frame (underneath the cushion). The locking tabs on the Anti-Rebound Bar are wider than the hole in the seat frame and must be depressed to fit.
Always ensure that each Locking Pin is securely installed through both sides of the Anti-Rebound Bar and that the Locking Pin Clips are through the Locking Pins.
Watch video instructions on how to install Anti-Rebound Bar below.